{"product_id":"48v-100ah-v2-t-elite-series-lifepo4-battery-5-12kwh","title":"48V 100Ah V2-T Elite Series LiFePO4 Battery (5.12kWh)","description":"\u003cp\u003eThis is a special order item, please allow up to 2 weeks for delivery. If the battery is out of stock, we will contact you with lead times and options.\u003c\/p\u003e\n\u003cul class=\"list-disc pl-[20px] marker:text-[#959EAB]\"\u003e\n\u003cli class=\"mb-[2px] text-[14px] font-normal text-[#4A4A4A]\"\u003e48V 100Ah V2-T Elite Series LiFePO4 Battery (5.12kWh): 51.2V nominal, 100Ah and 5,120Wh (5.12kWh) of nominal stored energy in one case, for native 48V off-grid solar, marine, RV and backup power systems; plan runtime on about 4,096Wh. A deep-cycle battery for house power and energy storage, not engine starting.\u003c\/li\u003e\n\u003cli class=\"mb-[2px] text-[14px] font-normal text-[#4A4A4A]\"\u003eUser-Serviceable 250A Class T Fuse: A 250A Eaton Class T fuse behind a sealed top service panel improves source protection at the battery. It does not replace the main disconnect, downstream protection or cable sizing: install a DC-rated fuse or circuit breaker in the positive conductor, as close to the battery as practical.\u003c\/li\u003e\n\u003cli class=\"mb-[2px] text-[14px] font-normal text-[#4A4A4A]\"\u003eNative VICTRON Communications: CAN bus at 500 kbit\/s to a compatible Victron GX device (Cerbo GX, Ekrano GX or Cerbo GX Mk2). The battery reports its status, and with DVCC on it sets the charge voltage and current limits of Victron chargers. The communication harness is included; set the DIP switches and GX settings per the manual.\u003c\/li\u003e\n\u003cli class=\"mb-[2px] text-[14px] font-normal text-[#4A4A4A]\"\u003eElite Performance Specifications: 80A maximum continuous discharge, about 4,096W DC at 51.2V before inverter losses, and 250A for 10 seconds for surges. 80A maximum continuous charge from all sources combined, with up to 90A for 5 seconds. If an inverter's continuous DC input can exceed 80A, add batteries in parallel.\u003c\/li\u003e\n\u003cli class=\"mb-[2px] text-[14px] font-normal text-[#4A4A4A]\"\u003eBLUETOOTH Monitoring: Bluetooth through the included battery gauge, which shows state of charge, voltage and current. The free Epoch Cloud app (iOS and Android) shows state of charge, voltage, current, temperature, cycles and alerts for each battery and the bank. A mountable external power button is included.\u003c\/li\u003e\n\u003cli class=\"mb-[2px] text-[14px] font-normal text-[#4A4A4A]\"\u003eHEATED For Cold Climates: LiFePO4 cells must not be charged below 0°C (32°F). When the battery is too cold to accept charge, the BMS uses incoming charge current to power the internal heating pads first, then allows normal charging once the cells reach a safe temperature. Charging is supported down to -30°C (-22°F) ambient when charge current is available; discharge works down to -20°C (-4°F).\u003c\/li\u003e\n\u003cli class=\"mb-[2px] text-[14px] font-normal text-[#4A4A4A]\"\u003eIP67 Rated Enclosure: Dust-tight and protected against temporary immersion in up to 1m of water for 30 minutes, with all seals and glands installed. It is not rated for water jets, pressure washing or continuous submersion: install it where it stays dry in normal use, with all harness connectors fully seated.\u003c\/li\u003e\n\u003cli class=\"mb-[2px] text-[14px] font-normal text-[#4A4A4A]\"\u003eDimensions \u0026amp; Fit: 20.86\" L x 8.65\" W x 12.06\" H (529.8 x 219.8 x 306.3 mm; the height includes the terminal posts), 97 lb (approx. 44 kg). Lift with two people and install it upright. Replacing a Group 8D lead-acid battery? Confirm tray fit, hold-down and lid clearance first; the optional Epoch V2 \u0026amp; V2-T mounting bracket (8D, sold separately) fastens to the threaded inserts on the case.\u003c\/li\u003e\n\u003cli class=\"mb-[2px] text-[14px] font-normal text-[#4A4A4A]\"\u003eParallel Banks Only: Up to 16 batteries in parallel (1,600Ah, 81.92kWh), using matched C48100A-A batteries of the same age, capacity and state of charge, with the DIP switches set for the bank. The C48100A-A is a native 48V battery: do not connect it in series; series-parallel is not supported either.\u003c\/li\u003e\n\u003cli class=\"mb-[2px] text-[14px] font-normal text-[#4A4A4A]\"\u003eAdvanced Smart BMS \u0026amp; Certified Components: Overcharge, over-discharge, over-current, short-circuit and high\/low temperature protection. UL 1642, UL 9540A and IEC 62619:2022 cells; UL 60691 internal fuse; UN 38.3 (transport).\u003c\/li\u003e\n\u003cli class=\"mb-[2px] text-[14px] font-normal text-[#4A4A4A]\"\u003e3,500+ Cycle Life \u0026amp; 11-Year Limited Warranty: Rated for 3,500+ cycles (to 70% capacity). Maintenance-free: no watering or equalizing, though regular inspection and 12 N·m terminal torque checks keep the system safe. Backed by an 11-year limited warranty (5 years of free repair or replacement, then 40% off MSRP on a replacement battery through Year 11); register within 90 days or keep your proof of purchase.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bend Battery LLC","offers":[{"title":"Default Title","offer_id":67957709045850,"sku":null,"price":2599.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0638\/7187\/7210\/files\/epoch48t.avif?v=1793726712","url":"https:\/\/bendbattery.com\/products\/48v-100ah-v2-t-elite-series-lifepo4-battery-5-12kwh","provider":"Bend Battery LLC","version":"1.0","type":"link"}